Upgrade the firmware on D-Link router

[michel]

Hi,
Please take care for some steps that is used for the firmware upgrade of D-Link router.

Please read before this to upgrade:
 Upgrading firmware (in most cases) will reset all the settings to default which means you will lose all your settings (including your password).
 You do not have to upgrade Incrementally. You can upgrade the newest version.
 You cannot use the backup settings feature and apply it to the newer firmware.
 Do NOT upgrade firmware from a computer with a wireless connection. Use a computer that you can connect to the router using an Ethernet cable. You may damage the router due to the increased packet loss with a wireless connection.
 If your DI-604 was purchased in Europe, this upgrade will not work.

[stella]

Friends I have just upgraded my Router, I got information from D-link how to upgarde this:

Step 1 Download the latest firmware.

Step 2 Once you´ve downloaded the firmware, open a web browser such as Internet Explorer or Netscape and enter the IP address of your router (192.168.0.1).

Step 3 Enter your username (admin) and your password (leave the field blank). Click OK to enter the web configuration for the device.

Step 4 Click on the Tools tab and then the Firmware button on the left side. Click on the Browse button and browse to the .bin file you downloaded in Step 1. Highlight the file by clicking on it once and click Open.

Step 5 Click Apply. It may take a up to 30 seconds for the upgrade to complete. Click on the Continue button. The firmware is now upgraded.

Step 6 If you get a Page cannot be displayed or similar error after clicking Continue, close your browser and re-open it. Enter 192.168.0.1 and press Enter. You should now be prompted for your username (admin) and your password (leave blank).